Talk to a bath specialistFree · No obligation
(833) 334-4470
Burbank is a close-in southwest Chicago suburb in Cook County, tucked between Midway Airport and the Palos forest preserves.
Its streets are lined with brick bungalows and ranch homes from the postwar building decades, and many of those original baths are now ready for renewal.
For Burbank homeowners, Being Sauna arranges wet-area help: vetted local specialists, honest planning ranges published up front, and a free in-home assessment ending in a written quote.
In short: Bathroom remodeling in Burbank, Illinois covers the wet area — tub-to-shower conversions ($8,500–$17,000), shower replacement ($7,500–$15,000), walk-in showers ($9,000–$18,000) and tub replacement ($6,500–$13,000). Vetted local specialists serve Burbank and ZIP 60459. Call (833) 334-4470.
Six services, one specialty — the tub and shower. Each card links to its full guide, and the ranges below are what Burbank homeowners actually plan around.
Start with the guide that matches your room, then compare it with the cost table further down the page. For the full picture, see all our bathroom remodeling services.
A Burbank bungalow bath often centers on a tub the household rarely uses. Swapping it for a low-entry shower removes the high step, and the pan, valve and drain are renewed together in the same footprint.
Years of daily use wear a Burbank shower down: a valve that drifts, grout that darkens no matter how it is cleaned, or a pan at the end of its life. Pan, valve and walls are replaced together while the old unit is out.
A low-entry shower with a bench, anchored grab bars and controls within reach helps a Burbank home stay workable as needs change. Blocking for bars goes into real structure behind the tile.
Some Burbank households still want a real tub — for young children, for a long soak, or for a second bath that serves the whole house. A deeper modern tub usually fits inside two days.
A shower-only Burbank ranch can get a tub back without moving walls. A tub-shower combination returns, with renewed plumbing underneath and waterproofing behind the walls, built for family use.
Whole-room reworks for Burbank baths where tub and shower both need reworking at once, or where a dated bungalow bath needs a fresh start. One project, one written quote, wet area first — with ventilation and storage put right in the same pass.
A tub-to-shower conversion turns the high tub step in a Burbank bungalow into a low-entry shower — pan, valve and drain renewed together.
Burbank sits in the southwest Chicago contractor market, with crews working the routes toward Alsip, Evergreen Park, Worth and Palos Hills.
Most jobs land in the middle of these ranges, and the spread comes from the house, not the ZIP. A simple alcove swap is an easier job than a bungalow bath whose original valves need work, or a ranch bath with a tired drain.
The upper half of a range is priced in the written quote before work begins. For the method behind every figure, see the 2026 bathroom remodeling cost guide.
| Project | Planning range |
|---|---|
| Tub-to-shower conversion | $8,500 – $17,000 |
| Shower replacement | $7,500 – $15,000 |
| Walk-in shower | $9,000 – $18,000 |
| Bathtub replacement | $6,500 – $13,000 |
| Shower-to-tub conversion | $7,500 – $14,000 |
| Full bathroom remodel | $15,000 – $35,000+ |
Planning ranges based on published national installer pricing (2026), for budgeting guidance — not quotes. Compare quotes on what they cover: pan, valve and drain together.
The cheapest number often leaves a worn drain or tired valve behind new walls. Full methodology: the 2026 cost guide.
Burbank is a Cook County village on Chicago's southwest side, and its bathrooms reflect that history: brick bungalows from the postwar decades, ranch homes on quiet side streets, and split-levels near the Harlem Avenue corridor.
The Burbank service area covers about 28,739 people in ZIP 60459, between Alsip toward the south and the Chicago city line toward the north.
Burbank housing runs from brick bungalows along the older streets to ranch homes and split-levels in the later subdivisions. The bungalow baths are typically compact, with a hall bath and a primary bath sized for a small footprint.
That layout shapes the job. A low-entry shower usually fits the existing alcove, so walls rarely move. The older homes add one extra check: brick and plaster walls that need careful cutting and sealing before new tile goes up.
Burbank homes are served by the municipal water system, so wells and septic systems are not the local question. The question is age: original supply lines and valves in a postwar home may be near the end of their service life.
The assessment confirms pressure and valve condition before fixtures are chosen, so a tired valve does not shorten the new shower's life. The drain side deserves equal attention, since an older drain can narrow over decades of daily use.
Burbank has cold, snowy Chicago winters and warm, humid summers, with freeze-thaw cycles working on every exterior wall. Winter cold works on supply lines run through exterior walls and unheated spaces.
Summer humidity adds a second reason to get ventilation right. A bath fan that vents properly keeps new tile and grout dry through the humid months, and the assessment checks the fan while the room is open.
An illustrative wet-area remodel of the kind served around Burbank — shown as a design example, not a completed project photo in Burbank.
Nothing fancy — just four things that help the specialist price your Burbank bath on the first visit. Know the home type: brick bungalow, ranch or split-level. Note any history of slow drains, temperature swings, or damp around the tub.
Bring a rough footprint measurement and note whether a second bath exists, so the household keeps a wash-up option during the work. Settle which outcome matters most first — safer step-in shower, deeper tub, or full-room rework — so the quote prices the right job.
Our Burbank coverage centers on the village and ZIP 60459, with specialists travelling the Cook County routes toward Alsip, Evergreen Park, Palos Hills and Worth — typical directions:
Coverage centers on Burbank and the 60459 ZIP in Cook County, with specialists travelling the county routes to Alsip, Evergreen Park, Palos Hills and Worth.
We publish planning ranges on every page. No “call for price”, no games — you budget before anyone visits.
The price you sign is the price you pay. Quotes are written, itemised and valid beyond the day of the visit — take your time deciding.
Installers are independent local contractors checked for licensing, insurance and wet-area specialisation before they take a single Being Sauna job — including experience with brick bungalows, ranch baths and aging supply lines.
The biggest complaint in this industry is the same-day pressure close. Our specialists are instructed the opposite way: measure, explain, quote in writing, and leave the decision to you.
Call (833) 334-4470 or send the assessment form. Tell us the neighborhood, the bath, and whether the home is a brick bungalow, a ranch or a split-level — that is all the booking needs.
A vetted local specialist measures the room, checks the valves, drain, ventilation and water setup, and explains the options in plain language. No charge, no obligation.
Most wet-area projects finish in one to three days, with the house left clean and the new shower or tub demonstrated before the crew leaves.
Most wet-area projects in Burbank follow the planning ranges on this page: tub-to-shower conversions $8,500-$17,000, shower replacements $7,500-$15,000, walk-in showers $9,000-$18,000, bathtub replacements $6,500-$13,000, shower-to-tub conversions $7,500-$14,000 and full remodels $15,000-$35,000+. Your exact price is confirmed in writing after a free in-home assessment.
Usually only in the details. A Burbank bungalow bath normally keeps its alcove, so the new low-entry shower fits where the tub stood. Brick and plaster walls need careful cutting and sealing, and the assessment checks the wall behind the tub before quoting, so no surprise appears once the old tub is out.
Yes, and the assessment does exactly that. Many Burbank bungalows and ranches still carry original supply lines, valves and drains from their building decades. Checking the pan, valve and drain together while the room is open is far cheaper than opening finished walls later, so the written quote prices any worn section as part of the same job.
Usually, yes. A low-entry shower normally fits the existing tub alcove, so walls rarely move. The assessment measures the alcove, checks the drain position and confirms the valve placement, then prices the swap as a same-footprint job whenever the layout allows it.
A vetted local specialist measures the room, checks the pan, valve, drain, ventilation and water setup, and explains the options in plain language. You receive a written, itemised quote that stays valid beyond the day of the visit. There is no charge, no obligation, and no pressure to sign on the day.
How Being Sauna works (transparency note): Being Sauna is a free homeowner service that connects you with independent, vetted local bathroom remodeling contractors — we do not install bathrooms ourselves.
Cost figures are planning ranges from published national installer pricing; see our cost guide methodology. This page was last reviewed in October 2026. Questions: beingsauna@gmail.com or (833) 334-4470. Hours: Mon–Sat 9 AM–8 PM CT.
Free in-home assessment in Burbank · No pressure · No obligation
Call (833) 334-4470