Talk to a bath specialistFree · No obligation
(833) 334-4470
Highland is an unincorporated community in Howard County, Maryland, between Clarksville and Laurel along the MD-108 corridor, within reach of both Baltimore and Washington.
Colonials, older farmhouses, ranches and newer subdivisions stand side by side here, and many family baths still hold a tub that is hard to step into or a shower that has seen better days.
For Highland homeowners, Being Sauna arranges wet-area help: vetted local specialists, honest planning ranges published up front, and a free in-home assessment ending in a written quote.
In short: Bathroom remodeling in Highland, Maryland covers the wet area: tub-to-shower conversions ($8,500-$17,000), shower replacement ($7,500-$15,000), walk-in showers ($9,000-$18,000) and tub replacement ($6,500-$13,000). Vetted local specialists serve Highland and ZIP 20777. Call (833) 334-4470.
Six services, one specialty — the tub and shower. Each card links to its full guide, and the ranges below are what Highland homeowners actually plan around.
Start with the guide that matches your room, then compare it with the cost table further down the page. For the full picture, see all our bathroom remodeling services.
Many Highland family baths still hold a tub nobody soaks in, often in a colonial off MD-108 or a ranch near Clarksville. A low-entry shower replaces it, with pan, valve and drain renewed together.
Years of hard water wear a Highland shower down: a valve that drifts hot and cold, a tired pan, or grout that never looks clean again. Pan, valve and walls are replaced together, with the drain checked while the room is open.
A low-entry shower with a bench, anchored grab bars and controls within reach helps a Highland home stay workable as needs change. Blocking for the bars goes into real structure behind the wall, not just the surface.
Some Highland households still want a real tub — for young children, for a long soak, or for a second bath in a busy family home. A deeper modern tub usually fits within two days, with fresh plumbing and a sealed surround.
A shower-only Highland home can get a tub back without moving walls. A tub-shower combination returns, with renewed plumbing underneath and waterproofing behind the walls, built to stand up to daily family use.
Whole-room reworks suit Highland baths where tub and shower both need attention at once, or where a dated colonial bath needs a fresh start. One project, one written quote, with the wet area rebuilt first.
A tub-to-shower conversion turns the unused tub in a Highland bath into a low-entry shower — pan, valve and drain renewed together.
Highland sits in the Howard County contractor market, with crews working between Clarksville, Fulton, Laurel, Savage and Columbia.
Most jobs land in the middle of these ranges, and the spread comes from the house, not the ZIP. A straightforward subdivision alcove swap is an easier job than a farmhouse bath whose tile, glass and plumbing all need work at once.
The upper half of a range is priced in the written quote before work begins. For the method behind every figure, see the 2026 bathroom remodeling cost guide.
| Project | Planning range |
|---|---|
| Tub-to-shower conversion | $8,500 – $17,000 |
| Shower replacement | $7,500 – $15,000 |
| Walk-in shower | $9,000 – $18,000 |
| Bathtub replacement | $6,500 – $13,000 |
| Shower-to-tub conversion | $7,500 – $14,000 |
| Full bathroom remodel | $15,000 – $35,000+ |
Planning ranges based on published national installer pricing (2026), for budgeting guidance — not quotes. Compare quotes on what they cover: pan, valve and drain together.
The cheapest number often leaves a worn drain or tired valve behind new walls. Full methodology: the 2026 cost guide.
Highland grew as a commuter village between the Baltimore and Washington corridors, and its bathrooms show that mix: older farmhouses beside newer subdivisions along MD-108.
There are about 3,221 people in the Highland service area, with Clarksville, Fulton, Laurel, Savage and Columbia at its edges.
Farmhouses hold some of Highland's oldest baths. Their layouts are often practical and generous, so careful measuring and drain checks matter before any walls are opened.
Colonials and ranches bring familiar family layouts, while newer subdivisions bring standard rooms ready for an upgrade. Either way, the room is measured first and the drain route is confirmed.
Highland homes split between county water and sewer and private wells with septic systems on the rural edges. The visit confirms which setup your home has before anything is chosen.
Hard water is common here, and mineral buildup leaves its mark on fixtures and glass. A tired valve can hide behind steady-looking pressure, so valves are checked before new walls go up.
Highland winters bring cold snaps and freeze-thaw cycles that test pipes, shut-offs and grout. Shut-offs and drainage are confirmed before winter, so a cold snap never becomes a leak behind new tile.
Summers are warm and humid, with Chesapeake moisture making ventilation and fan airflow worth checking early. Fans, filters and seals get checked before the humid months settle in.
An illustrative wet-area remodel of the kind served around Highland — shown as a design example, not a completed project photo in Highland.
Nothing fancy — just a few things that help the specialist price your Highland bath on the first visit. Know the home type: colonial, farmhouse, ranch, subdivision home or another build.
Note any history of slow drains, mineral buildup, temperature swings or older plumbing quirks. Bring a rough footprint measurement and note whether a second bath exists, so the household keeps a wash-up option during the work.
Settle which outcome matters most first — safer step-in shower, deeper tub, or full-room rework — so the quote prices the right job.
Our Highland coverage centers on the town and ZIP 20777, with specialists travelling toward nearby Howard County towns — typical directions:
Coverage centers on Highland and ZIP 20777 in Howard County, with specialists travelling the routes to Clarksville, Fulton, Laurel, Savage, and Columbia.
We publish planning ranges on every page. No “call for price”, no games — you budget before anyone visits.
The price you sign is the price you pay. Quotes are written, itemised and valid beyond the day of the visit — take your time deciding.
Installers are independent local contractors checked for licensing, insurance and wet-area specialisation before they take a single Being Sauna job — including experience with Howard County plumbing, county water and wells, and farmhouse baths.
The biggest complaint in this industry is the same-day pressure close. Our specialists are instructed the opposite way: measure, explain, quote in writing, and leave the decision to you.
Call (833) 334-4470 or send the assessment form. Tell us the neighborhood, the bath, and whether the home is a colonial, farmhouse, ranch, subdivision home or another build — that is all the booking needs.
A vetted local specialist measures the room, checks the valves, drain, ventilation and water setup, and explains the options in plain language. No charge, no obligation.
Most wet-area projects finish in one to three days, with the house left clean and the new shower or tub demonstrated before the crew leaves.
Highland wet-area projects follow the planning ranges on this page: tub-to-shower conversions $8,500-$17,000, shower replacements $7,500-$15,000, walk-in showers $9,000-$18,000, bathtub replacements $6,500-$13,000, shower-to-tub conversions $7,500-$14,000 and full remodels $15,000-$35,000+. Your exact price is confirmed in writing after a free in-home assessment.
Yes, the visit starts by confirming which setup your home has. Many Highland homes use county water and sewer, while rural edges run on private wells and septic systems. Hard water is common in both cases, so valves and showerheads are checked for mineral buildup before anything is chosen.
It means two kinds of baths on the same roads. Older farmhouses often have generous rooms with older plumbing runs, while newer subdivisions have standard layouts and builder-grade fittings. The assessment measures first and plans around the house as it stands, so the quote fits the real room.
With a little planning, very little. Freeze-thaw winters make shut-offs and pipe protection worth confirming before work starts, and humid Chesapeake summers make fan airflow and seals worth checking early. Most wet-area projects still finish in one to three days.
A vetted local specialist measures the room, checks the pan, valve, drain, ventilation and water setup, and walks through the options in plain language. You receive a written, itemised quote that stays valid beyond the day of the visit. There is no charge, no obligation, and no pressure to sign on the day.
How Being Sauna works (transparency note): Being Sauna is a free homeowner service that connects you with independent, vetted local bathroom remodeling contractors — we do not install bathrooms ourselves.
Cost figures are planning ranges from published national installer pricing; see our cost guide methodology. This page was last reviewed in October 2026. Questions: beingsauna@gmail.com or (833) 334-4470. Hours: Mon–Sat 9 AM–8 PM CT.
Free in-home assessment in Highland · No pressure · No obligation
Call (833) 334-4470