Talk to a bath specialistFree · No obligation
(833) 334-4470
Bellmore is a hamlet in Nassau County on Long Island's south shore, in the Town of Hempstead, and its service-area population is about 34,834.
It sits along Merrick Road between Merrick and Wantagh, close to Jones Beach, with a walkable village on Bedford Avenue and a Long Island Rail Road station.
For Bellmore homeowners, Being Sauna arranges wet-area help: vetted specialists, honest planning ranges, and a free assessment ending in a written quote.
In short: Bathroom remodeling in Bellmore covers the wet area: tub-to-shower conversions ($8,500–$17,000), shower replacement ($7,500–$15,000), walk-in showers ($9,000–$18,000) and tub replacement ($6,500–$13,000). Vetted local specialists serve Bellmore and nearby Nassau County communities. Call (833) 334-4470.
Six services, one specialty — the tub and shower. Each card links to its full guide, and the ranges below are what Bellmore homeowners actually plan around.
Many Bellmore baths still hold a tub that sees little use, while the shower does the daily work. Post-war Capes and ranches here often carry a small tub-shower unit. Swapping it for a low-entry shower renews the pan, valve and drain together.
An ageing Bellmore shower shows its age through grout that never looks clean, a valve that swings hot and cold, or a pan worn thin by decades of use. South-shore humidity punishes weak ventilation. Rebuilding the whole shower gives the room a clean, dry start.
For a Bellmore home that should stay easy to use for years, a walk-in shower removes the high step. A bench, anchored grab bars and controls within reach help every member of the household use the room safely.
Some Bellmore households would rather keep the tub. Families with small children, and anyone who likes a long soak after a cold Long Island winter, often stay with one. A deeper modern tub usually fits in a day or two.
A Bellmore home with only a shower can get its tub back without moving a wall. The finished job is a tub-shower combination with fresh plumbing underneath and waterproofing behind the surround.
When both tub and shower in a Bellmore bath need work at the same time, a whole-room rework makes sense. One project and one written quote, with the wet area rebuilt first and everything else planned around it.
A tub-to-shower conversion turns the little-used tub in a Bellmore bath into a low-entry shower — pan, valve and drain renewed together.
Bellmore sits on Long Island's south shore in Nassau County, with crews working across the hamlet and toward Merrick, Wantagh, Seaford and Massapequa nearby.
Most jobs land in the middle of these ranges. The spread comes from the home, not the ZIP. A straightforward Cape swap is an easier job than an older Colonial bath whose plumbing, tile and ventilation all need work at once.
The upper half of a range is priced in the written quote before work begins. For the method behind every figure, see the 2026 bathroom remodeling cost guide.
| Project | Planning range |
|---|---|
| Tub-to-shower conversion | $8,500 – $17,000 |
| Shower replacement | $7,500 – $15,000 |
| Walk-in shower | $9,000 – $18,000 |
| Bathtub replacement | $6,500 – $13,000 |
| Shower-to-tub conversion | $7,500 – $14,000 |
| Full bathroom remodel | $15,000 – $35,000+ |
Planning ranges based on published national installer pricing (2026), for budgeting guidance — not quotes. Compare quotes on what they cover: pan, valve and drain together.
The cheapest number often leaves a worn drain or tired valve behind new walls. Full methodology: the 2026 cost guide.
Bellmore is a hamlet in Nassau County on Long Island's south shore, with Merrick, Wantagh, Seaford, Massapequa, East Meadow, Levittown, Freeport and Farmingdale nearby.
The housing mix, water setup, south-shore seasons and local landmarks all shape how a wet-area project is planned here, so each one is covered below.
Bellmore housing runs from post-war Capes and ranches to split-levels, high-ranches and Colonials. Different eras mean different baths, so no two jobs price alike.
The room is measured first and the drain route is confirmed before anything is priced. Cape and ranch baths are often compact, and older supply lines are checked early, before walls are closed up.
Most Bellmore homes use public water, while wastewater arrangements vary across the south shore. Some homes connect to sewers and others rely on on-site systems, so the setup for each home is confirmed at the visit.
Older homes can still hold ageing supply lines and drains from their original build. The visit confirms the water setup for that home before options are priced, and checks the valve, the showerhead and shut-off locations.
Bellmore winters bring snow, ice and cold snaps, so ventilation and freeze protection matter: fans are checked so steam clears fast, and pipes are checked so a cold snap causes no damage.
Summers bring warm, humid days, and south-shore air stays damp longer. The visit checks ventilation and the vent route, so the room dries properly in every season, including after coastal storms.
Bellmore Village, along Bedford Avenue, holds shops, restaurants and community events that draw families from across the Town of Hempstead. The village gives this south-shore hamlet a walkable centre.
The Bellmore station on the Long Island Rail Road carries commuters west toward the city, and Jones Beach lies a short drive south across the bay. That mix of village, rail and beach shapes this commuter hamlet.
An illustrative wet-area remodel of the kind served around Bellmore — shown as a design example, not a completed project photo in the area.
Nothing fancy — just a few things that help the specialist price your Bellmore bath on the first visit. Know the home type: Cape, ranch, split-level, high-ranch, Colonial, or a later home near the village.
Note any history of slow drains, temperature swings, low pressure, or stained grout. If the bath is small, access is tight, or an older drain has caused trouble before, mention it so the visit can plan properly.
Settle which outcome matters most first — a tub kept for children, a low-entry shower for daily use, or a full-room rework — so the quote prices the right job.
Our Bellmore coverage centers on the hamlet and its ZIP code, with specialists travelling toward nearby Nassau County communities — typical directions:
Coverage centers on Bellmore and its ZIP code, with specialists travelling the routes to Merrick, Wantagh, Seaford, Massapequa, East Meadow, Levittown, Freeport, and Farmingdale.
We publish planning ranges on every page. You budget before anyone visits, and nothing about pricing is hidden.
The price you sign is the price you pay. Quotes are written, itemised and valid beyond the day of the visit, so you can take your time deciding.
Installers are independent local contractors checked for licensing, insurance and wet-area specialisation before they take a Being Sauna job, including experience with south-shore humidity, older home plumbing and village homes.
High-pressure selling is the complaint homeowners raise most often about this trade. Our specialists work the other way: measure the room, explain the options, leave a written quote, and let you decide in your own time.
Call (833) 334-4470 or send the assessment form. Tell us the city, the bath, and whether the home is a Cape, a ranch, a split-level, a high-ranch, a Colonial, or a later home near the village — that is all the booking needs.
A vetted local specialist measures the room, checks the valves, drain, ventilation and water setup, and explains the options in plain language. No charge, no obligation.
Most wet-area projects finish in one to three days. The crew leaves the house clean and shows you how the new shower or tub works before they go.
Bellmore wet-area projects follow the planning ranges on this page: tub-to-shower conversions $8,500–$17,000, shower replacements $7,500–$15,000, walk-in showers $9,000–$18,000, bathtub replacements $6,500–$13,000, shower-to-tub conversions $7,500–$14,000 and full remodels $15,000–$35,000+. Your exact price is confirmed in writing after a free in-home assessment.
Bellmore mixes post-war Capes and ranches with split-levels, high-ranches and Colonials, plus later homes near the village and the rail station. Many baths still hold an original tub, tile and valve from an earlier era. A visit measures the room and checks the drain route before any option is priced.
Bellmore sits near the south shore bays, so coastal humidity and storm-season dampness matter more here than inland. The visit checks the fan, the vent route and the wall build-up, so steam clears fast and the room dries properly in every season.
Older Bellmore homes can hold ageing supply lines and drains that have reached the end of their life, and some rely on on-site wastewater systems. The visit checks the supply lines, the drain and the valve for that home, so the written quote prices the real job rather than a guess.
A vetted local specialist measures the room, checks the pan, valve, drain, ventilation and water setup, then walks through the options in plain language. You receive a written, itemised quote that stays valid beyond the day of the visit, with no charge, no obligation, and no pressure to sign on the day.
How Being Sauna works (transparency note): Being Sauna is a free homeowner service that connects you with independent, vetted local bathroom remodeling contractors — we do not install bathrooms ourselves.
Cost figures are planning ranges from published national installer pricing; see our cost guide methodology. This page was last reviewed in October 2026. Questions: beingsauna@gmail.com or (833) 334-4470. Hours: Mon–Sat 9 AM–8 PM CT.
Free in-home assessment in the Bellmore area · No pressure · No obligation
Call (833) 334-4470